Today’s electrical (mis)adventure

It was my intention to install the adapter to convert the four-way flat to seven-way round on my Jeep Renegade. If this is gibberish to you, don’t fret… this meant nothing to me a few days ago. Basically, the adapter will allow Mindy’s electrical parts to work with Mork’s stuff. 😛

4pin-adapter1

Mission accomplished… well, sort of.

I was able to get the bracket and adapter installed, but no power going to the lights on Mork.

After consulting with a forum, I learned that I needed to attach the group wire. Oops!

4pin-adapter2

OK… done. But… still no power. Plus… I learned that I would need to have the blue wire hooked up in order for the brake light to work. And… the black wire would need to be connected in order to get power from Mindy to Mork.

BTW… if you’re just joining the Mork & Mindy escapade. Mork is my 1981 Scamp travel trailer, and Mindy is my 2016 Jeep Renegade. 😉

So… I have decided to step away from the colorful wires and leave this one to the pros.

2 thoughts on “Today’s electrical (mis)adventure

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s